ltop
rtop
Home
Produkte
Support
Registrierung
 
 
Messtechnik
 | 
Radial run-out gage with center supports 818 MarStand
Ohne Kalibrierung Mit Kalibrierung
Article-No.: 4622201 Article-No.: 4622201KAL
In den Warenkorb
In den Warenkorb
  • Eigenschaften
  • Techn. Daten
  • Abmessungen
  • Zubehör
  • Download
Application
  • Fast and easy radial run-out testing between tips
  • When measuring a shaft between tips, the reference axis for the radial runout measurement is usually identical to the rotational axis during production. A minimal radial run-out deviation can therefore be expected during this test procedure.
Product features Unit composed of:

  • Bench gage
  • Flatness of the surface is in accordance to DIN 876-2
  • Two T-slots for tailstock and / or support arm
  • Support arm 818 XNB
  • Support arm with one joint
  • With fine adjustment
  • Tailstocks
  • Both tailstocks can be relocated (slide into position)
  • The tailstock on the right side has a retractable (spring actuated) precision aligned center
  • The tailstocks have a peak of height of 75 mm with a 90° prism
  • For workpieces without a center, utilizing support arms, the maximum diameter is 20 mm (0.79")
Mahr GmbH | Carl-Mahr-Straße 1 | 37073 Göttingen | Germany | Tel. +49 551 7073-0 |eMail | AGB | Nutzungsbedingungen | Datenschutz | Impressum | www.Mahr.com